Volksforum.com

Go Back   Volksforum.com > International > Technical > Aircooled projects
User Name
Password
Home FAQ Register Members List Calendar Today's Posts





Reply
 
Thread Tools Search this Thread
  #161  
Old 22-05-2016, 18:21
Ben Modified's Avatar
Ben Modified Ben Modified is offline
Forum Regular
 
Join Date: Apr 2015
Posts: 131
Default

Reply With Quote
  #162  
Old 22-05-2016, 18:38
Sjeesbeest Sjeesbeest is offline
Volksforum Aandeelhouder
 
Join Date: Apr 2005
Posts: 1,450
Default

Nice work! What will be the color when it't completely ready?
__________________
Reply With Quote
  #163  
Old 25-05-2016, 00:15
Ben Modified's Avatar
Ben Modified Ben Modified is offline
Forum Regular
 
Join Date: Apr 2015
Posts: 131
Default

Quote:
Originally Posted by Sjeesbeest
Nice work! What will be the color when it't completely ready?


All black to contrast the chrome
Reply With Quote
  #164  
Old 25-05-2016, 00:16
Ben Modified's Avatar
Ben Modified Ben Modified is offline
Forum Regular
 
Join Date: Apr 2015
Posts: 131
Default

Closed up the gap under both doors. Some light sanding still to come.






Also posted Part 16 on Youtube

https://www.youtube.com/watch?v=JIeS9brt95g
Reply With Quote
  #165  
Old 16-06-2016, 00:08
Ben Modified's Avatar
Ben Modified Ben Modified is offline
Forum Regular
 
Join Date: Apr 2015
Posts: 131
Default

Apparently Block Hugger headers and urethane engine mounts do not play well together!










Wrapped the headers where they immediately surround the motor mounts. If the mounts do not melt any further, then I will install new ones.




Also boxed in the area between the front of the radiator and the back of the side air scoop to keep hot engine compartment air away from the front of the radiator.







http://www.BenModified.com
Reply With Quote
  #166  
Old 21-07-2016, 09:07
Tjaap's Avatar
Tjaap Tjaap is offline
Volksforum Crew - You WILL comply!!
 
Join Date: Dec 2003
Posts: 25,213
Default

any updates?
__________________
Welcome to the internet:
Where men are men, women are men, and little girls are FBI agents.
Reply With Quote
  #167  
Old 21-07-2016, 19:09
Ben Modified's Avatar
Ben Modified Ben Modified is offline
Forum Regular
 
Join Date: Apr 2015
Posts: 131
Default

Quote:
Originally Posted by Tjaap
any updates?


I do! We have had many 100f / 38c days in a row so I added some supplemental cooling in anticipation of the additional heat created by the air conditioner (to be installed). Located in the right side scoop.


















Also working on some Mud Flaps




Been spending a bit of time finishing up a stalled project from a few years back.

[IMG]
IMAG0541 by Ben Modified, on Flickr[/IMG]


The body got stuck at the Sandblasters shop for about a year....but finally going back together.

[IMG]
20160114_174332 by Ben Modified, on Flickr[/IMG]

Many rust repair spots

[IMG]
20160713_165219 by Ben Modified, on Flickr[/IMG]

Swapped out the Automatic for a 5 Speed


20160719_172124 by Ben Modified, on Flickr

[IMG]
20160720_150055 by Ben Modified, on Flickr[/IMG]


http://www.BenModified.com

Last edited by Ben Modified : 16-08-2016 at 00:13.
Reply With Quote
  #168  
Old 22-07-2016, 12:37
chrisjuh chrisjuh is offline
Forum junkie
 
Join Date: Aug 2004
Posts: 1,832
Default

Oeh thats even better then the Cab! Nice!
__________________
FAHRVERGNÜGEN!
Reply With Quote
  #169  
Old 03-08-2016, 03:52
Tjaap's Avatar
Tjaap Tjaap is offline
Volksforum Crew - You WILL comply!!
 
Join Date: Dec 2003
Posts: 25,213
Default

what color will you paint that?
__________________
Welcome to the internet:
Where men are men, women are men, and little girls are FBI agents.
Reply With Quote
  #170  
Old 04-08-2016, 00:49
Ben Modified's Avatar
Ben Modified Ben Modified is offline
Forum Regular
 
Join Date: Apr 2015
Posts: 131
Default

Quote:
Originally Posted by Tjaap
what color will you paint that?


I am thinking about a high impact green, similar to the late model camaro green.
Reply With Quote
  #171  
Old 16-08-2016, 00:25
Ben Modified's Avatar
Ben Modified Ben Modified is offline
Forum Regular
 
Join Date: Apr 2015
Posts: 131
Default

[COLOR=Sienna]I had to reposition the engine mounts on the Bug (long story involving the harmonic balancer) which meant that I also had to rework the headers [/COLOR]

[IMG]
20160811_102057 by Ben Modified, on Flickr[/IMG]

[IMG]
20160815_150838 by Ben Modified, on Flickr[/IMG]

[IMG]
20160815_150850 by Ben Modified, on Flickr[/IMG]

Also adapted a clutch pedal and hydraulic system to the previous automatic setup

[IMG]
20160803_125259 by Ben Modified, on Flickr[/IMG]

[IMG]
20160803_125328 by Ben Modified, on Flickr[/IMG]

[IMG]
20160803_125555 by Ben Modified, on Flickr[/IMG]

[IMG]
20160803_125806 by Ben Modified, on Flickr[/IMG]

[IMG]
20160810_172035 by Ben Modified, on Flickr[/IMG]

[IMG]
20160808_124338 by Ben Modified, on Flickr[/IMG]
Reply With Quote
  #173  
Old 20-08-2016, 17:26
Ben Modified's Avatar
Ben Modified Ben Modified is offline
Forum Regular
 
Join Date: Apr 2015
Posts: 131
Default

Went to a small local car show today!

[IMG]
20160820_073522 by Ben Modified, on Flickr[/IMG]

[IMG]
20160820_092322 by Ben Modified, on Flickr[/IMG]

http://www.BenModified.com
Reply With Quote
  #174  
Old 20-08-2016, 17:56
jones jones is offline
Postwhore
 
Join Date: Nov 2008
Posts: 1,153
Default

so cool next to the lambo
Reply With Quote
  #175  
Old 14-09-2016, 00:58
Ben Modified's Avatar
Ben Modified Ben Modified is offline
Forum Regular
 
Join Date: Apr 2015
Posts: 131
Default

I am making a big push to get this truck finished up. I have it up on the lift to cross things off a long list of minor items. I am also going to pull the cab off to finish up some welding on the underside.

[IMG]
20160913_172307 by Ben Modified, on Flickr[/IMG]

First on the list is sectioning out a 4" section of the under seat A/C compartment. It is deeper than I need and cuts into my ground clearance.

[IMG]
20160913_172112 by Ben Modified, on Flickr[/IMG]

[IMG]
20160913_172123 by Ben Modified, on Flickr[/IMG]

Also, finally getting around to finishing the bottom of the doors and moving the lower hinge up a few inches. Can't wait to trim off all that extra metal.

[IMG]
20160913_172223 by Ben Modified, on Flickr[/IMG]

Here are a few shots of the underside.

[IMG]
20160913_104525 by Ben Modified, on Flickr[/IMG]

[IMG]
20160913_104514 by Ben Modified, on Flickr[/IMG]

While I am at it, I will check that every nut and bolt is tight.

http://www.BenModified.com


Reply With Quote
  #176  
Old 15-09-2016, 00:36
Ben Modified's Avatar
Ben Modified Ben Modified is offline
Forum Regular
 
Join Date: Apr 2015
Posts: 131
Default

Todays progress. I was able to finish sectioning the A/C Compartment. The front and back are welded in. I am going to wait to get the cab off before welding the sides.

[IMG]
20160914_162149 by Ben Modified, on Flickr[/IMG]

The vents will eventually go out the front of the compartment and up thru the floor

[IMG]
20160914_163958 by Ben Modified, on Flickr[/IMG]

Made the final rough cut on the bottom of the door

[IMG]
20160914_174639 by Ben Modified, on Flickr[/IMG]

Also cut out the lower hinge. Tomorrow I will clean up the metal around it and relocate it up a couple of inches.


20160914_174650 by Ben Modified, on Flickr

http://www.BenModified.com
Reply With Quote
  #177  
Old 16-09-2016, 00:45
Ben Modified's Avatar
Ben Modified Ben Modified is offline
Forum Regular
 
Join Date: Apr 2015
Posts: 131
Default

Spent the entire day moving the lower hinge on the passenger door, as well as capping off the lower section of the door.

First, I had to modify the mounting pad to angle the hinge

[IMG]
20160915_093612 by Ben Modified, on Flickr[/IMG]

Cut a piece of 3/16" flat bar to weld to the new mount area. Tapped the holes to accept the stock screws.

[IMG]
20160915_150019 by Ben Modified, on Flickr[/IMG]

Then trim up the door to accept the original hinge mount section from the further down door.

[IMG]
20160915_102203 by Ben Modified, on Flickr[/IMG]

The hinge is in place

[IMG]
20160915_150033 by Ben Modified, on Flickr[/IMG]

Cut out a piece of metal to cap off the bottom of the door

[IMG]
20160915_154705 by Ben Modified, on Flickr[/IMG]

Welded in along with a piece of small round bar to give it a blunt edge

[IMG]
20160915_171104 by Ben Modified, on Flickr[/IMG]

Just need to finish off the bottom of the nose where it meets the door and fab a channel on the inside of the door to accept weather strip along the bottom

[IMG]
20160915_173703 by Ben Modified, on Flickr[/IMG]

[IMG]
20160915_173914 by Ben Modified, on Flickr[/IMG]

http://www.BenModified.com
Reply With Quote
  #178  
Old 16-09-2016, 07:35
knarfmk1's Avatar
knarfmk1 knarfmk1 is offline
Shifting Up! DSG7 Donateur Less talk, more action!
 
Join Date: Jun 2005
Posts: 4,041
Default

Looks cleaner now!
Reply With Quote
  #179  
Old 24-09-2016, 20:00
Ben Modified's Avatar
Ben Modified Ben Modified is offline
Forum Regular
 
Join Date: Apr 2015
Posts: 131
Default

Drivers door is done

[IMG]
20160924_123643 by Ben Modified, on Flickr[/IMG]

[IMG]
20160924_123814 by Ben Modified, on Flickr[/IMG]

[IMG]
20160924_130208 by Ben Modified, on Flickr[/IMG]

http://www.BenModified.com
Reply With Quote
  #180  
Old 29-09-2016, 00:22
Ben Modified's Avatar
Ben Modified Ben Modified is offline
Forum Regular
 
Join Date: Apr 2015
Posts: 131
Default

Putting everything back together. Road trip on Saturday.

[IMG]
20160927_172622 by Ben Modified, on Flickr[/IMG]
[IMG]
20160928_160251 by Ben Modified, on Flickr[/IMG]

[IMG]
20160928_161540 by Ben Modified, on Flickr[/IMG]

http://www.BenModified.com
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump




All times are GMT +1. The time now is 18:47.


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
All rights reserved, Volksforum