This is one radical car! Amazing detail.

Can you tell me why you've picked the 9N steering rack? What's so special about this piece?

__________________

Nothing special but all the new cars have electric steering as you can see on one of the upper pictures where 3 different steering racks are shown. One of them is from a golf Mk5, so it's the same as the one used by the Audi TT RS and because I'm going to be using the whole electric harness I will need a electric steering.

__________________
TUNINGGARAGE
REVO TECHNIK

Nice project

__________________
Seekrank ...

Nice project!

__________________
BMW E30 325i
Golf 7 highline business R

Nothing new done on the car so far. I'm getting ready to finish up some minor things around the dash and start building a Roll cage. In the mean time the only part that was ordered, and arrived were the H&R triple C 212 chamber bolts




I hope soon I will have something more done like the roll cage

__________________
TUNINGGARAGE
REVO TECHNIK

I'm just about to finish up the rear axle
This is how the rear axle looks:
















one of the things I need to finish are these for Camber/toe adjustments




I bought these from my local VW dealer they are from Audi RS6 rear axle, you can find them on the ETKA as part number:WHT001682 that is if anybody needs them. All i need to do now is to make camber/toe plates. If you want these all done you can find them on this site:
http://www.dutchbuild.com/index.php...hk=1&Itemid=104

__________________
TUNINGGARAGE
REVO TECHNIK

It's cold so almost nothing is being done on the car but I gathered all the screws and nuts including the ones needed for the chamber adjustment and took them to be chromed.




and how they turned out










not perfect but OK

__________________
TUNINGGARAGE
REVO TECHNIK

OK so today came the last parts that I needed to finish the rear axle.

Powerflex







And these are the rings and the bonded aluminum bush that I need to finish the mounting points on the axle. There are going to be 4 mounting points something similar to the factory rear axle from golf Mk5 4 motion




and the piece between the rings is an adapter that I need to combine the Golf Mk5 brake master cylinder and the 94 Passat VR6 brake and clutch pedals. And when these piece is welded it should look like this:

__________________
TUNINGGARAGE
REVO TECHNIK

beautiful project mate ,
keep up the good work

TNX

__________________
TUNINGGARAGE
REVO TECHNIK

Today I finally finished the rear axle and I really liked how it turned out :P

Here are some pictures:
















I also took the rear axle holder to be chromed

__________________
TUNINGGARAGE
REVO TECHNIK

You are really doing a good job! My compliments.

__________________
Groetjes,
Bert

VW Jetta 1.6 1984 (NL)
Audi Q7 3.0 TFSI 2019 (UAE)
Audi TT 2006 (UAE)
Volvo XC60 2010 lifted and modified (UAE)


"Because there's a thin line between hobby and mental illness!"

Not much done on the car but I really didn't had much time and I got the fly. But now I'm OK and will continue working on my project
Today finally the Roll Cage from OMP arrived :










... so the work continues

__________________
TUNINGGARAGE
REVO TECHNIK

Who made your rear axle? Cage is also looking very nice!

__________________

The rear axle was done by me and me only

__________________
TUNINGGARAGE
REVO TECHNIK

It looks good! I like the simpe but robust look of it.

__________________

I finally found a Lancia delta Integrale hood :P
Here are some pictures










I was looking foe these hood for a ling time and finally found one

__________________
TUNINGGARAGE
REVO TECHNIK

I like that way you handle your project. Keep up this nice job!

Today I finally finished installing the roll cage . The roll cage needed some modifications to accept the Golf 5 dash but finally it's done Here are some pictures:













so moving forward with the project

__________________
TUNINGGARAGE
REVO TECHNIK

love the hf hood..

__________________


BBB Build by Boekes Site - Custom Wheels