View Single Post
  #2  
Old 21-05-2020, 19:15
jorrick jorrick is offline
Forum Newbee
 
Join Date: May 2013
Posts: 24
Default

Ik zit natuurlijk zelf ook te zoeken, leren en te lezen zo kwam ik deze guide tegen.
https://www.team-bhp.com/forum/diy-...rol-module.html


Voor het opslaan van de instellingen zeggen ze:
Quote:
1. First and the most important step - connect the VCDS cable and copy-paste the long coding from the 09-Central Electronics module > Coding - 07 to a notepad file.









Take screenshots of all the 29 Bytes under the Long Coding Helper.

2. Next up, go to 19-CAN Gateway module > Coding - 07 and copy-paste the long coding to the notepad file.

Click on Installation List and take the screenshots of the options that are ticked:




Important: These options will vary from car to car! Please do not take this as a reference for your car!

These have to be transferred to the new BCM after doing the physical swap.



Uhm ok. Dan heb ik dus een aantal instellingen opgeslagen maar de BCM heeft nog veel meer instellingen. Moet ik die allemaal niet ook kopiƫren dan?
Zoals deze: 01-Engine, 03-ABS Brakes, 08-Auto HVAC, 10-Park/Steer Assist, 15-Airbags, 17-Instruments, 19-CAN Gateway, 25-Immobilizer, 44-Steering Assist, 56-Radio en 77-Telephone

Moet ik die niet allemaal backuppen?





Thanks Gannu 1 for the guide.
Reply With Quote