Thread
:
Golf Rallye 2.5 tfsi 4 motion
View Single Post
#
102
14-04-2011, 21:20
2fast4you
Forum Regular
Join Date: Nov 2009
Posts: 160
Some progress was done these past days.
I totally redone the sub frame for the Golf MK5 dash. I newer posted pictures of the sub frame and the work done for it to be fitted because I didn't like how it was done :thumbdown:
So I started everything over again and here is how everything was done:
first of all I bought a new subframe
and the original Golf 5 holders that the sub frame is tighten to and cut them to fit
then more cutting
and then started making some pieces to weld on the chassis that would except the holders for the sub frame
after I welded the holders I cut the rest of the sub frame to fit between the pieces
took the sub frame to be welded and here are the results:
and...
after the sub frame was fitted next was the intake for the air conditioning
first I took a part of the air conditioning to be a little modified
and then everything could be welded
After all of these I had to redo the shifter because it had to move 2 sm back ( it was too close to the dash)
__________________
TUNING
GARAGE
REV
O
TECHNIK
2fast4you
View Public Profile
Send a private message to 2fast4you
Find all posts by 2fast4you
Add 2fast4you to Your Buddy List